GENIFY panel is
very easy to process.All
cutting,milling, slotting,side-folding
and curving can be
easily fulfilled by
simple tools used
for processing timber
and metal.It can be
shaped into various
shapes,such as curve,reserve
curve, curve comer
and sharp curve,according
to requirements of
building design.It
is incomparalbe for
other decorating materials。
Normal aluminum product
processing machinery
and wood product processing
machinery can be used
for processing of
GENIFY panel without
special device。
Saw cutting
It can be easily processed with wood product processing saw and plate saw.It's recommended to use hard alloy blade。
Slotting
It's important to make the U type slotting
process with a distance fo 0.2-0.4mm from the
polyethylene substrate。
The recommended slot angle is 110。
●（1）milling machine and trimmer
Use the modified drill as showed in
the left chart。
Running
speed:20000-30000rpm Feed
speed:3-5m/min Materal:hard alloy
●（2）When processing large quantity of U type slots，
it's recommended to use round saw and belt saw.And the following is an example of slotter；
●material：hard alloy flake
●outer diameter：305mm
●number of teeth：24
●running speed：3,000-5,000rpm
●feed
speed：5m/min
Bending with panel folder
If operated on the
platform,bending part can be made very
tidy.Platen puncher,plate folder or bending dies
are applied as bending equipment.The recommended
temperature for bending is over 10℃。
Bending with panel bender
When plate folder is used to finish the HuaYuan panel,dies shall be placed on with appropriate radius.And the required parameters of HuaYuan panel is showed as below。
Bending with 3-roller panel bender
3-roller panel bender is more preferable for bending of large intemal diameler to plate folder,beforethe bending,it shall ensure that it can be manually bent after bending。
Riveting
Countersunk rivet can realize
easy joint from one
direction。
Bolting
Considering from deformation limit,formul e>2D is the best calculation way of aperture D anddistance from hole center to plate end。
